-------------------------------------------------
2021 - 02-23 - Printrbot Metal Plus - Home - M501
-------------------------------------------------

> M501
< echo:Stored settings retrieved
< echo:Steps per unit:
< echo:  M92 X80.00 Y80.00 Z2020.00 E93.50
< echo:Maximum feedrates (mm/s):
< echo:  M203 X125.00 Y125.00 Z5.00 E14.00
< echo:Maximum Acceleration (mm/s2):
< echo:  M201 X2000 Y2000 Z30 E10000
< echo:Acceleration: S=acceleration, T=retract acceleration
< echo:  M204 S3000.00 T3000.00
< echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
< echo:  M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
< echo:Home offset (mm):
< echo:  M206 X0.00 Y0.00 Z0.00
< echo:PID settings:
< echo:   M301 P22.20 I1.08 D114.00
< echo:Min position (mm):
< echo:  M210 X0.00 Y0.00 Z0.00
< echo:Max position (mm):
< echo:  M211 X250.00 Y250.00 Z254.00
< echo:Bed probe offset (mm):
< echo:  M212 X25.00 Y0.00 Z-0.35

-------------------------------------------------
2021 - 02-23 - Printrbot Metal Plus - Home - M501
-------------------------------------------------